Nanocellulose production from recycled paper mill sludge using ozonation pretreatment followed by recyclable maleic acid hydrolysis

Roi Peretz, Elizaveta Sterenzon, Yoram Gerchman, Vinod Kumar Vadivel, Thomas Luxbacher, Hadas Mamane

Research output: Contribution to journalArticlepeer-review

Abstract

Nanocellulose (NC) have garnered much interest worldwide due to its physical and chemical properties. Nanocellulose is produced from biomass materials by bleaching pretreatment, followed by acid hydrolysis. This work demonstrated the production of NC from recycled paper sludge (RPS), a crystalline cellulose rich waste, by ozonation pretreatment, followed by maleic acid hydrolysis. Ozonation resulted in removal of lignin (as evident by TGA analysis), negative zeta potential of RPS and enhanced NC production, from 60 mg/L to over 80 mg/L after 60–120 min of ozone treatment. Maleic acid was successfully recovered, although longer ozonation times reduced the amount of acid available for recovery. These results demonstrate that ozonation can be used as an effective pretreatment for NC production.

Original languageEnglish
Pages (from-to)343-351
Number of pages9
JournalCarbohydrate Polymers
Volume216
DOIs
StatePublished - 15 Jul 2019

Keywords

  • Acid recycling
  • Green engineering
  • Lignin removal
  • Nanocellulose
  • Ozonation
  • Recycled paper sludge (RPS)

Fingerprint

Dive into the research topics of 'Nanocellulose production from recycled paper mill sludge using ozonation pretreatment followed by recyclable maleic acid hydrolysis'. Together they form a unique fingerprint.

Cite this