Multiwell plates for obtaining a rapid microbial dose-response curve in UV-LED systems

Yifaat Betzalel, Yoram Gerchman, Vered Cohen-Yaniv, Hadas Mamane

Research output: Contribution to journalArticlepeer-review

Abstract

UV light-emitting diodes (UV-LEDs) have emerged as a new technology for water disinfection. Multiwell plates are a common tool in biological research, but they have never been used for UVC/UVB-inactivation experiments of microorganisms. In this study, a novel, rapid and simple UVC/UVB-inactivation assay was developed for a UV-LED system using a multiwell plate setup (96- and 24-well plates). The relative incident irradiance distribution across the exposed area was examined by spectroradiometry and nitrate-nitrite uniformity assay. The two methods showed a good correlation and high distribution factors (>0.89 and >0.94 for 96- and 24-well plates, respectively). In addition, the potential of the new system for determining disinfection efficacy of E. coli and MS2 coliphage by UV-LEDs emitting at central wavelengths of 265 nm and 285 nm was demonstrated. The inactivation rate constants were comparable to those obtained using UV-LED systems with the conventional dish (or beaker) setup, but the multiwell plate method allowed for many more repetitions. The proposed system is an alternative for UV-inactivation dose-response assay, especially when screening assays are desired, since it has the advantage of being fast, comprehensive (with a large number of simultaneous replicates) and easily adapted to various applications as UV-LED based photocatalysis experiments, UV effect on biofilm formation and UV-based AOP degradation experiments.

Original languageEnglish
Article number111865
JournalJournal of Photochemistry and Photobiology B: Biology
Volume207
DOIs
StatePublished - Jun 2020

Keywords

  • E. coli
  • MS2 coliphage
  • Multiwell plate
  • UV light-emitting diode (UV-LED)
  • Water treatment

Fingerprint

Dive into the research topics of 'Multiwell plates for obtaining a rapid microbial dose-response curve in UV-LED systems'. Together they form a unique fingerprint.

Cite this