DC-DC converter based on the bipolar boost converter and Dickson voltage multiplier

Y. Berkovich; B. Axelrod; D. Shoshani; Y. Beck

doi:10.1109/ENERGYCON.2018.8398748

DC-DC converter based on the bipolar boost converter and Dickson voltage multiplier

Y. Berkovich^*
, B. Axelrod
, D. Shoshani
, Y. Beck

^*Corresponding author for this work

School of Electrical Engineering

Holon Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Abstract

A novel modification of DC-DC converter with a high voltage ratio is proposed. The converter consists of an input boost converter, bridge commutator and Dickson voltage multiplier. The circuit is characterized by a high voltage gain. An important advantage of the circuit is its practically rigid external characteristic in the continuous current mode (CCM). This is achieved by the absence of active power losses in the process of capacitors' recharging. An additional advantage of the proposed scheme is the low required capacitance of the voltage multiplier capacitors A detailed analysis of the proposed converters has been produced. The results of theoretical analysis are confirmed by the simulation in MATLAB/SIMULINK. Circuit verification has been made in a laboratory prototype with the output power 200W.

Original language	English
Title of host publication	2018 IEEE International Energy Conference, ENERGYCON 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1-6
Number of pages	6
ISBN (Electronic)	9781538636695
DOIs	https://doi.org/10.1109/ENERGYCON.2018.8398748
State	Published - 27 Jun 2018
Event	2018 IEEE International Energy Conference, ENERGYCON 2018 - Limassol, Cyprus Duration: 3 Jun 2018 → 7 Jun 2018

Publication series

Name	2018 IEEE International Energy Conference, ENERGYCON 2018

Conference

Conference	2018 IEEE International Energy Conference, ENERGYCON 2018
Country/Territory	Cyprus
City	Limassol
Period	3/06/18 → 7/06/18

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

DC-DC converter
Power supply
Voltage multiplier

Access to Document

10.1109/ENERGYCON.2018.8398748

Cite this

Berkovich, Y., Axelrod, B., Shoshani, D., & Beck, Y. (2018). DC-DC converter based on the bipolar boost converter and Dickson voltage multiplier. In 2018 IEEE International Energy Conference, ENERGYCON 2018 (pp. 1-6). (2018 IEEE International Energy Conference, ENERGYCON 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ENERGYCON.2018.8398748

@inproceedings{4d9829652f8b47f5b464b814a4b020d3,

title = "DC-DC converter based on the bipolar boost converter and Dickson voltage multiplier",

abstract = "A novel modification of DC-DC converter with a high voltage ratio is proposed. The converter consists of an input boost converter, bridge commutator and Dickson voltage multiplier. The circuit is characterized by a high voltage gain. An important advantage of the circuit is its practically rigid external characteristic in the continuous current mode (CCM). This is achieved by the absence of active power losses in the process of capacitors' recharging. An additional advantage of the proposed scheme is the low required capacitance of the voltage multiplier capacitors A detailed analysis of the proposed converters has been produced. The results of theoretical analysis are confirmed by the simulation in MATLAB/SIMULINK. Circuit verification has been made in a laboratory prototype with the output power 200W.",

keywords = "DC-DC converter, Power supply, Voltage multiplier",

author = "Y. Berkovich and B. Axelrod and D. Shoshani and Y. Beck",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 2018 IEEE International Energy Conference, ENERGYCON 2018 ; Conference date: 03-06-2018 Through 07-06-2018",

year = "2018",

month = jun,

day = "27",

doi = "10.1109/ENERGYCON.2018.8398748",

language = "אנגלית",

series = "2018 IEEE International Energy Conference, ENERGYCON 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1--6",

booktitle = "2018 IEEE International Energy Conference, ENERGYCON 2018",

address = "ארצות הברית",

}

Berkovich, Y, Axelrod, B, Shoshani, D & Beck, Y 2018, DC-DC converter based on the bipolar boost converter and Dickson voltage multiplier. in 2018 IEEE International Energy Conference, ENERGYCON 2018. 2018 IEEE International Energy Conference, ENERGYCON 2018, Institute of Electrical and Electronics Engineers Inc., pp. 1-6, 2018 IEEE International Energy Conference, ENERGYCON 2018, Limassol, Cyprus, 3/06/18. https://doi.org/10.1109/ENERGYCON.2018.8398748

DC-DC converter based on the bipolar boost converter and Dickson voltage multiplier. / Berkovich, Y.; Axelrod, B.; Shoshani, D. et al.
2018 IEEE International Energy Conference, ENERGYCON 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 1-6 (2018 IEEE International Energy Conference, ENERGYCON 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - DC-DC converter based on the bipolar boost converter and Dickson voltage multiplier

AU - Berkovich, Y.

AU - Axelrod, B.

AU - Shoshani, D.

AU - Beck, Y.

PY - 2018/6/27

Y1 - 2018/6/27

N2 - A novel modification of DC-DC converter with a high voltage ratio is proposed. The converter consists of an input boost converter, bridge commutator and Dickson voltage multiplier. The circuit is characterized by a high voltage gain. An important advantage of the circuit is its practically rigid external characteristic in the continuous current mode (CCM). This is achieved by the absence of active power losses in the process of capacitors' recharging. An additional advantage of the proposed scheme is the low required capacitance of the voltage multiplier capacitors A detailed analysis of the proposed converters has been produced. The results of theoretical analysis are confirmed by the simulation in MATLAB/SIMULINK. Circuit verification has been made in a laboratory prototype with the output power 200W.

AB - A novel modification of DC-DC converter with a high voltage ratio is proposed. The converter consists of an input boost converter, bridge commutator and Dickson voltage multiplier. The circuit is characterized by a high voltage gain. An important advantage of the circuit is its practically rigid external characteristic in the continuous current mode (CCM). This is achieved by the absence of active power losses in the process of capacitors' recharging. An additional advantage of the proposed scheme is the low required capacitance of the voltage multiplier capacitors A detailed analysis of the proposed converters has been produced. The results of theoretical analysis are confirmed by the simulation in MATLAB/SIMULINK. Circuit verification has been made in a laboratory prototype with the output power 200W.

KW - DC-DC converter

KW - Power supply

KW - Voltage multiplier

UR - https://www.scopus.com/pages/publications/85050231948

U2 - 10.1109/ENERGYCON.2018.8398748

DO - 10.1109/ENERGYCON.2018.8398748

M3 - ???researchoutput.researchoutputtypes.contributiontobookanthology.conference???

AN - SCOPUS:85050231948

T3 - 2018 IEEE International Energy Conference, ENERGYCON 2018

SP - 1

EP - 6

BT - 2018 IEEE International Energy Conference, ENERGYCON 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2018 IEEE International Energy Conference, ENERGYCON 2018

Y2 - 3 June 2018 through 7 June 2018

ER -

DC-DC converter based on the bipolar boost converter and Dickson voltage multiplier

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this