School of Mechanical Engineering

Filter
Conference contribution

Search results

  • 2011

    Parameter study of simplified dragonfly airfoil geometry at reynolds number of 6,000

    Levy, D. E. & Seifert, A., 2011, 50th Israel Annual Conference on Aerospace Sciences 2010. Technion Israel Institute of Technology, p. 190-218 29 p. (50th Israel Annual Conference on Aerospace Sciences 2010; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Real-time synchronous imaging of electromechanical resonator mode and equilibrium profiles

    Linzon, Y., Joe, D., Barton, R. A., Ilic, R. B., Krylov, S., Parpia, J. M. & Craighead, H. G., 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems, MEMS 2011. p. 485-488 4 p. 5734467. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Recovery of lost performance due to premature transition using active flow control

    Troshin, V. & Seifert, A., 2011, 51st Israel Annual Conference on Aerospace Sciences 2011. p. 660-678 19 p. (51st Israel Annual Conference on Aerospace Sciences 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Rules for implementating dynamic changes in DSM-based plans

    Karniel, A. & Reich, Y., 2011, ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design. p. 243-255 13 p. (ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Synthesizing two criteria for redundancy resolution of human arm in point tasks

    Kashi, B., Rosen, J., Brand, M. & Avrahami, I., 2011, Proceedings of the 2011 3rd World Congress on Nature and Biologically Inspired Computing, NaBIC 2011. p. 63-68 6 p. 6089418. (Proceedings of the 2011 3rd World Congress on Nature and Biologically Inspired Computing, NaBIC 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Three-dimensional numerical modeling of stratified flows in littoral zone of israel using shallow water approximation

    Sladkevich, M., Levin, A. & Kit, E., 2011, Computational Science and High Performance Computing IV: The 4th Russian-German Advanced Research Workshop, Freiburg, Germany, October 12 to 16, 2009. p. 349-361 13 p. (Notes on Numerical Fluid Mechanics and Multidisciplinary Design; vol. 115).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Two-directional switching of bistable curved micro beams by fringing electrostatic fields

    Krylov, S., Ilic, B. R. & Lulinsky, S., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. p. 209-218 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Understanding engineering systems through the engineering knowledge genome: Structural genes of systems topologies

    Shai, O. & Reich, Y., 2011, ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design. p. 220-230 11 p. (ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2010

    Adjustable tensegrity robot based on Assur graph principle

    Shai, O., Tehori, I., Bronfeld, A., Slavutin, M. & Ben-Hanan, U., 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), p. 257-261 5 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 10, no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A MEMS device with sub-nanometer displacement sensing using carbon nanotubes

    Ya'akobovitz, A., Krylov, S. & Hanein, Y., 2010, IEEE Sensors 2010 Conference, SENSORS 2010. p. 2447-2450 4 p. 5690793. (Proceedings of IEEE Sensors).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Carbon nanotube self-assembeled high frequency resonator

    Ya'akobovitz, A., Karp, G., David-Pur, M., Krylov, S. & Hanein, Y., 2010, MEMS 2010 - The 23rd IEEE International Conference on Micro Electro Mechanical Systems, Technical Digest. p. 432-435 4 p. 5442472. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Employing assur tensegrity structures methods for simulating a caterpillar locomotion

    Orki, O., Shai, O., Tehori, I., Slavutin, M. & Ben-Hanan, U., 2010, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. PARTS A AND B ed. p. 101-106 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Entrainment reduction and additional dissipation in dilute polymer solutions

    Holzner, M., Lüthi, B., Liberzon, A., Guala, M. & Kinzelbach, W., 2010, Progress in Turbulence III - Proceedings of the iTi Conference in Turbulence 2008. Oberlack, M., Peinke, J. & Talamelli, A. (eds.). Springer Science and Business Media, LLC, p. 207-210 4 p. (Springer Proceedings in Physics; vol. 131).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Evaluation of a targeted-QSPR based pure compound property prediction system

    Shacham, M., Paster, I., Rowley, R. L., Tovarovski, G. & Brauner, N., 2010, 10AIChE - 2010 AIChE Annual Meeting, Conference Proceedings. (AIChE Annual Meeting, Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Flow phenomena and heat transfer augmentation during phase separation of partially miscible solvent systems

    Ullmann, A., Gat, S. & Brauner, N., 2010, 6th International Symposium on Multiphase flow, Heat Mass Transfer and Energy Conversion. p. 81-91 11 p. (AIP Conference Proceedings; vol. 1207).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Flow rate maldistribution in multi heated parallel pipes

    Baikin, M., Taitel, Y. & Barnea, D., 2010, 2010 14th International Heat Transfer Conference, IHTC 14. p. 375-384 10 p. (2010 14th International Heat Transfer Conference, IHTC 14; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Heat transfer characteristics in a slug unit

    Babin, V., Barnea, D. & Shemer, L., 2010, 2010 14th International Heat Transfer Conference, IHTC 14. p. 929-935 7 p. (2010 14th International Heat Transfer Conference, IHTC 14; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Inventing a new method in statics through knowledge in kinematics

    Shai, O. & Reich, Y., 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART B ed. American Society of Mechanical Engineers (ASME), p. 1139-1145 7 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 8, no. PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Kinematically excited large angle tilting actuator

    Ya'akobovitz, A. & Krylov, S., 2010, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. p. 555-560 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Linear QSPRs for the prediction of acentric factor and critical volume of long-chain substances

    Brauner, N., Paster, I. & Shacham, M., 2010, 10AIChE - 2010 AIChE Annual Meeting, Conference Proceedings. (AIChE Annual Meeting, Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Local versus nonlocal processes in turbulent flows, kinematic coupling and general stochastic processes

    Kholmyansky, M., Sabelnikov, V. & Tsinober, A., 2010, Turbulence and Interactions: Proceedings the TI 2009 Conference. Springer Verlag, p. 215-221 7 p. (Notes on Numerical Fluid Mechanics and Multidisciplinary Design; vol. 110).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Numerical analysis of a novel method for temperature gradient measurement in the vicinity of warm inflamed atherosclerotic plaques

    Aronis, Z., Massarwa, E., Rosen, L., Rotman, O., Eliasy, R., Haj-Ali, R. & Einav, S., 2010, XII Mediterranean Conference on Medical and Biological Engineering and Computing 2010, MEDICON 2010. p. 584-587 4 p. (IFMBE Proceedings; vol. 29).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Numerical models of an artery with different stent types

    Brand, M., Ryvkin, M., Einav, S., Avrahami, I., Rosen, J. & Teodorescu, M., 2010, XII Mediterranean Conference on Medical and Biological Engineering and Computing 2010, MEDICON 2010. p. 545-548 4 p. (IFMBE Proceedings; vol. 29).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Parametric excitation of flexural vibrations of micro beams by fringing electrostatic fields

    Krylov, S., Molinazzi, N., Shmilovich, T., Pomerantz, U. & Lulinsky, S., 2010, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. p. 601-611 11 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Phase transition of partially miscible solvents induced by heating cycles: Application for the remediation of contaminated sediments and sludge

    Ullmann, A., Brauner, N., Dahan, G., Golan, T. & Ludmer, Z., 2010, 2010 14th International Heat Transfer Conference, IHTC 14. p. 643-651 9 p. (2010 14th International Heat Transfer Conference, IHTC 14; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Stress concentrations of vulnerable plaques with a composite variable core

    Massarwa, E., Ze'ev, A., Eliasy, R., Haj-Ali, R. & Einav, S., 2010, ASME 2010 Summer Bioengineering Conference, SBC 2010. PARTS A AND B ed. p. 29-30 2 p. (ASME 2010 Summer Bioengineering Conference, SBC 2010; no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Vertical junction high-efficiency concentrator photovoltaic cells

    Sarfaty, R., Segev, G., Pozner, R., Kribus, A. & Rosenwaks, Y., 2010, 2010 IEEE 26th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2010. p. 421-424 4 p. 5662191. (2010 IEEE 26th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2010).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Vertical junction Si photovoltaic cells for concentrating PV

    Pozner, R., Segev, G., Sarfaty, R., Kribus, A. & Rosenwaks, Y., 2010, 6th International Conference on Concentrating Photovoltaic Systems, CPV-6. p. 58-61 4 p. (AIP Conference Proceedings; vol. 1277).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2009

    A micro heat engine executing an internal carnot cycle

    Lurie, E. & Kribus, A., 2009, 2008 Proceedings of the 2nd International Conference on Energy Sustainability, ES 2008. p. 165-172 8 p. (2008 Proceedings of the 2nd International Conference on Energy Sustainability, ES 2008; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A rigid punch on an elastic half-space under the effect of friction - A finite difference solution

    Dorogoy, A. & Banks-Sills, L., 2009, 2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis. p. 259-271 13 p. (2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Closed-loop bluff-body wake stabilization via fluidic excitation

    Stalnov, O., Fono, I. & Seifert, A., 2009, 49th Israel Annual Conference on Aerospace Sciences 2009. p. 370-384 15 p. (49th Israel Annual Conference on Aerospace Sciences 2009; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Creativity theories and scientific discovery: A study of C-K theory and infused design

    Shai, O., Reich, Y., Hatchuel, A. & Subrahmanian, E., 2009, DS 58-2: Proceedings of ICED 09, the 17th International Conference on Engineering Design. p. 263-274 12 p. (DS 58-2: Proceedings of ICED 09, the 17th International Conference on Engineering Design; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Development of a methodology for measurement of mechanics properties of materials used on the microscale

    Banks-Sills, L., Shklovsky, J., Krylov, S., Bruck, H., Fourman, V. & Eliasi, R., 2009, 12th International Conference on Fracture 2009, ICF-12. p. 549-550 2 p. (12th International Conference on Fracture 2009, ICF-12; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Electromagnetic microactuators with on-chip resin-bonded permanent magnets

    Schreiber, D., Krylov, S., Shacham-Diamand, Y. & Sibgatullin, T., 2009, 2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis. p. 319-325 7 p. (2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Electromechanical behavior of suspended taut single-walled carbon nanotubes

    Ya'akobovitz, A., Karp, G., Hanein, Y. & Krylov, S., 2009, 2009 IEEE International Conference on Microwaves, Communications, Antennas and Electronics Systems, COMCAS 2009. 5385952. (2009 IEEE International Conference on Microwaves, Communications, Antennas and Electronics Systems, COMCAS 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Evolutionary search of optimal concepts using a relaxed-pareto-optimality approach

    Denenberg, E. & Moshaiov, A., 2009, 2009 IEEE Congress on Evolutionary Computation, CEC 2009. IEEE Computer Society, p. 2524-2531 8 p. 4983258. (2009 IEEE Congress on Evolutionary Computation, CEC 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Experimental study of lid-driven cavity flows in the Lagrangian frame of reference

    Elfassi, R. & Liberzon, A., 2009, 49th Israel Annual Conference on Aerospace Sciences 2009. p. 498-504 7 p. (49th Israel Annual Conference on Aerospace Sciences 2009; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Fracture in glass/epoxy multilayers from low-velocity impact

    Chai, H. & Ravichandran, G., 2009, 24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites. p. 2150-2156 7 p. (24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Fracture toughness of 2D low density periodic material

    Ryvkin, M., Lipperman, F. & Fuchs, M. B., 2009, 12th International Conference on Fracture 2009, ICF-12. p. 1256-1265 10 p. (12th International Conference on Fracture 2009, ICF-12; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Improving effectiveness of Agile development

    Menachem, S. & Reich, Y., 2009, DS 58-1: Proceedings of ICED 09, the 17th International Conference on Engineering Design. p. 311-322 12 p. (DS 58-1: Proceedings of ICED 09, the 17th International Conference on Engineering Design; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Inventing a new method in statics through knowledge in kinematics

    Shai, O. & Reich, Y., 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. p. 1139-1145 7 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 8, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Large angle parametrically excited tilting micro actuator

    Ya'akobovitz, A. & Krylov, S., 2009, 2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis. p. 289-293 5 p. (2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • MEMS accelerometer with mechanical amplification mechanism for enhanced sensitivity

    Ya'akobovitz, A. & Krylov, S., 2009, TRANSDUCERS 2009 - 15th International Conference on Solid-State Sensors, Actuators and Microsystems. p. 1948-1951 4 p. 5285671. (TRANSDUCERS 2009 - 15th International Conference on Solid-State Sensors, Actuators and Microsystems).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Metallization technologies and strategies for plastic based biochips, sensors and actuators for healthcare and medical applications

    Shacham-Diamand, Y., Krylov, S., Shmilovich, T., Almog, R. O., Fishelson, N., Sverdlov, Y., Torchinsky, I., Rosenman, G., Inberg, A. & Berkh, O., 2009, ECS Transactions - Microelectronics Technology and Devices - SBMicro 2009. 1 ed. Electrochemical Society Inc., p. 243-254 12 p. (ECS Transactions; vol. 23, no. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Modeling of boiling liquid expanding vapor explosion (bleve): Plane, cylindrical and spherical 1D model

    Pinhasi, G. A., Dahan, V., Dayan, A. & Ullmann, A., 2009, 2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis. p. 127-132 6 p. (2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Multi-objective evolution of robot neuro-controllers

    Moshaiov, A. & Ashram, A., 2009, 2009 IEEE Congress on Evolutionary Computation, CEC 2009. p. 1093-1100 8 p. 4983068. (2009 IEEE Congress on Evolutionary Computation, CEC 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Numerical models of an artery with a net structured stent

    Brand, M., Ryvkin, M., Einav, S. & Rosen, J., 2009, World Congress on Medical Physics and Biomedical Engineering: Image Processing, Biosignal Processing, Modelling and Simulation, Biomechanics. 4 ed. Springer Verlag, p. 1341-1344 4 p. (IFMBE Proceedings; vol. 25, no. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • On an alternative explanation of anomalous scaling and how inertial is the inertial range

    Kholmyansky, M. & Tsinober, A., 2009, Advances in Turbulence XII - Proceedings of the 12th EUROMECH European Turbulence Conference. Springer Verlag, p. 715-718 4 p. (Advances in Turbulence XII - Proceedings of the 12th EUROMECH European Turbulence Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • On an alternative explanation of anomalous scaling and how inertial is the inertial range

    Kholmyansky, M. & Tsinober, A., 2009, Advances in Turbulence XII - Proceedings of the 12th EUROMECH European Turbulence Conference, 2009. Eckhardt, B. (ed.). Springer Science and Business Media Deutschland GmbH, p. 715-718 4 p. (Springer Proceedings in Physics; vol. 132).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Optimal model selection using MP criterion for uncertain multivariable 2×2 systems based on IMC

    Shani, I., Brauner, N. & Brosilow, C. B., 2009, 2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis. p. 383-391 9 p. (2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review